Lord Of The Rings

Dalkullan Jewelry has expanded it's jewelry line, with lovely new rings, so perfect for stacking! With genuine gemstones, hand faceted (not by me), aren't they sweet?

Of course, the rings are completely hand fabricated by me. I started with sterling silver stock, and lovingly crafted each ring. I'll make yours for you, to whatever size you desire, and in your choice of the following gemstones: White Topaz, Sky Blue Topaz, Peridot, or Almandine Garnet, which is pictured above. Just specify which gemstone and which size ring you prefer in the customer comments section when ordering.

I hand set the gemstones in a sterling tube setting, and the bands are hammer textured. The two rings pictured are in size 7, and I made them for myself. The ring in front is the White Topaz, and in back is another view of the Almandine Garnet ring.

As always, each ring comes gift boxed and wrapped in lovely Swedish paper, making it perfect for gift giving. With Christmas coming soon, why not order your rings today?

Sterling Buds -- Earrings

The newest creation, Sterling Buds, is up at my Etsy shop. I took the photos of them using my new lightbox, which I made myself from directions I found online. It's turning out to be very useful, because today is cloudy and rainy, without the lightbox I'd have been stuck as far as photography goes.

I've been learning how to set stones, so far I've done bezel setting, which involved carefully pushing around the rim of the metal cup the cabochon is nestled in, to rub over the metal and hold the stone in. It's definitely harder than it looks to do, and takes a surprising amount of force. That's how the lapis cabochons in Sterling Buds were set.

Yesterday a box of supplies from Rio Grande, a wonderful source of jewelry making things, arrived. I'm excited about it, but also have a certain amount of trepidation, because I'm going to branch out into a new method of stone setting, tube setting. It involved drilling out the end of a tiny piece of sterling tubing, just the right size for the gemstone to sit down into the hole, and then rubbing the rim down over the edge of the stone. I'm going to be working with 3mm faceted gemstones, which are pretty tiny, so please wish me luck, and steady hands! I'll keep you posted how things are going.

Moon and Stars -- Sterling and Pearls

Moon & Stars, in sterling with pearl dangles, is a completely hand fabricated design. I begin with a sheet of sterling, and punch out two disks. The next step is trickier, taking out the central disk, to leave the hole in the first disk.

I have a heavy sheet of plastic, with holes of various diameters cut out in it, and line up the correct size hole over a sterling disk, until I have it just right, then mark the location with a Sharpie. I use that mark to line up the disk in the cutter, then punch out the hole. I could also use a jeweler's saw to make the disks, but I prefer to use a disk cutter -- it makes perfectly round disks every time.

The next step is to metal pieces of sterling scrap for the round sterling balls. I put the scrap on a charcoal block, and melt the silver with a torch. It's a lot of fun, the metal gets shiny, and then begins to curl up on itself, until it forms a nice round ball with a flat bottom. If I want to make a completely round sphere of sterling, I'd just scoop out a little hemisphere in the charcoal block to place the scrap sterling in before melting.

I do the finishing of the disk before I solder the sterling balls on. It's much easier to file, sand, and texture the disks beforehand, which is something I've learned from experience. I used a coarse file to create the texture on the disks, suggesting the surface of a moon after oblique meteor impact.

After sweat soldering on the sterling balls with medium solder, I attach the two jump rings using easy solder. Since the medium solder needs a higher temperature to melt than easy solder, the sterling balls stay securely soldered.

The final steps are attaching the freshwater pearl dangles using wire wrapping -- pearls are too delicate to take the heat of soldering, and adding handcrafted sterling earwires. And voila! A new earring design is complete, ready to be photographed and listed at Dalkullan Jewelry.

Moon and Stars -- Mixed Metal Earrings

Just listed these at Dalkullan Jewelry.
The lovely color variations on the brass disk are the result of heating the brass.
I made the shiny balls by melting sterling with my trusty torch, and then soldered them onto the disks.
I've been thinking about this design for months, but needed to get the right tools, and hone my torch skills, so that I could make them. Thanks for dropping in and taking a look!

Sterling Disk Earrings

These earrings were fun to make, with the added plus that I learned a lot. They're the first pair of post earrings I've made, and soldering on the wire took a bit of doing.

But, first things first. I started by using my trusty disk cutter to punch out .5 inch circles from sterling stock, and then textured the disks with the sharper end of a riveting hammer. My sweet hubby was kind enough to file and smooth the rivet hammer so it makes a nice impression on the metal. And first impressions are so important, don't you think?

I marked the center and drilled a hole part way through the back, to provide a little pocket for the tip of the earwire to fit. This makes a stronger join than just soldering the wire tip to a flat metal surface. I fired up my little torch, and soldered on the earwires to the disks, and also melted a couple pieces of sterling into nice round balls.

Alas, the little round balls didn't stay round for long! I put them on my bench block and pounded and textured them, too. Then they were sweat soldered (that sounds a bit disgusting, but it's just melting the solder on the back of one piece, laying it solder-side down on another, and then heating it to soldering the two together) and I followed up with a bit of filing and sanding.

Then a few hours jostling in the tumbler, and they were ready for their photo shoot. Hope you enjoyed reading about how the Sterling Disk Earrings were made, and thank so much for stopping by!

Hammered Brass Earrings

Here is the finished project. I decided against adding the bronze dyed freshwater pearls, I think just the two metals look so lovely, and the simple elegance of the design doesn't need any more adornment.

I textured the brass part of the earrings with a ball pein hammer, and then annealed the metal. Annealing is heating with a torch until the crystalline structure of the metal becomes malleable again. When metal is worked, it becomes harder and brittle, but annealing it makes it easy to bend again. Then I did a final dapping, to shape the earrings. With the addition of handcrafted sterling earwires the earrings were finished.

The background in the photo is a pottery piece I inherited from my Aunt, the same Aunt from Dalarne in Sweden that Dalkullan Jewelry is named for. My Aunt owned an inport shop in Chicago called Dalkullan, which means 'girl from Dalarne' which she was, and I chose the name to honor her memory, and my Father's, who was also from Dalarne.